Everflon™ Fluoropolymers

PFA

Perfluoro Alkoxy

Aatraea des fluoropolymères

PFA

Dé­couvrez les Everflon™ PFA

Explorez la gamme.

Comparer tous les modèles

render_9217.pngrender_1221.pngrender_1433.pngrender_9777.pngrender_4284.pngrender_1814.png
403410
420430D450GS04
GranuleGranuleGranuleGranuleAqueous DispersionPowder
Low MFR resin for molding and extrusion applicationsMid-range MFR resin for molding and extrusion applicationsHigh MFR resin for molding and extrusion applicationsResin with superior electrical properties and high MFR50% Solid Content for Coating and ImpregationFree-flowing, high-purity roto-molding and roto-lining powde

Melt Flow Index 

2~3g/10min

Melt Flow Index

6~14g/10min

Melt Flow Index

20~30g/10min

Melt Flow Index

35~45g/10min


Melt Flow Index

20~30g/10min

Tensile Strength

30Mpa

Tensile Strength

28Mpa

Tensile Strength

24Mpa

Tensile Strength

24Mpa



Elongation at Break

350%

Elongation at Break

330%

Elongation at Break

330%

Elongation at Break

300%



  • Tubing

  • Pipe lining

  • Films

  • Injection-/blow-molded parts

  • Thin wall wire insulation

  • Intricate/small injection- molded parts

  • Tubing

  • Wire and cable

  • Injection- molded parts

  • Thin wall wire insulation

  • Intricate-/small injection- molded parts

  • Glass cloth coating

  • Metal coatings

  • Hollow parts

  • Complex geometries

  • Lining


render_9028.pngrender_9499.pngrender_8613.pngrender_6583.pngrender_4898 (1).pngrender_4510.png
GC403GC410
GC420C-403C-410C-420
High Purity GranuleHigh Purity GranuleHigh Purity GranuleBlack GranuleBlack GranuleBlack Granule
Low MFR resin for molding and extrusion applicationsMid-range MFR resin with superior stress crack resistance for molding and extrusion applicationsHigh MFR resin for superior stress crack resistance for molding and extrusion applicationsLow MFR static dissipative resinMid-range MFR static dissipative resinHigh MFR static dissipative resin

Melt Flow Index

2~4g/10min

Melt Flow Index

6~14g/10min

Melt Flow Index

20~30g/10min

Melt Flow Index

2~4g/10min

Melt Flow Index

6~8g/10min

Melt Flow Index

12g/10min

Tensile Strength

30Mpa

Tensile Strength

28Mpa

Tensile Strength

24Mpa

Tensile Strength

30Mpa

Tensile Strength

30Mpa

Tensile Strength

30Mpa

Elongation at Break

350%

Elongation at Break

330%

Elongation at Break

330%

Elongation at Break

300%

Elongation at Break

300%

Elongation at Break

300%

  • Tubing and piping

  • Molded parts and linings

  • Sheet lining for vessels and chemical delivery systems in high purity applications

Injection molded parts and tubing in high purity applications

Injection molded parts in high purity applications (i.e., fittings, valve bodies, filter housings)

Tubing, linings, and molded parts that require static dissipative performance

Cables, tubing, linings, and molded parts that require static dissipative performance

Intricate-/small injection- molded parts


Partenaires particuliers.

Concentré de couleur Everflon™+ PFA

Couleurs standard et personnalisées La concentration des pigments peut être adaptée à des applications spécifiques Formules pré-colorées Les couleurs ne contiennent pas de métaux lourds

Résine PFA conductrice Everflon™+

Les résines fluoropolymères Everflon™ PFA C combinent la résistance chimique et à haute température du PFA avec des niveaux de conductivité électrique antistatiques.

Poudre de rotomoulage Everflon™ PFA

Everflon™ PFA GS04 est une résine haut de gamme disponible uniquement sous forme de poudre fluide. Ses caractéristiques uniques, à savoir une granulométrie et une distribution granulométrique contrôlées, garantissent un comportement optimal en matière d'écoulement et de fusion lors du rotomoulage.

Centre académique

Gryffindor of Everflon

Recherche en profondeur PFA

PFA